Downloads

Here you can download WinSetupFromUSB and updates of the tools included.

Please do not hotlink files, use this page if you want to post a link to the program. If you need to link to a specific version, you could use version number like this:

http://www.winsetupfromusb.com/downloads/#1-10

Note: A few antivirus programs keep detecting a couple of the included files as viruses. This is false positive. These vendors were informed numerous times and the serious companies such as DrWeb and Kaspersky, update their signatures to remove the false detection within a few hours after being informed. Others, such as McAfee, despite all the efforts and contacts, don’t do anything to update their signatures. For a few unknown ones, which use third party signatures, there is no way to contact them or they simply don’t respond. This program will never knowingly distribute any kind of malware.

WinSetupFromUSB 1.10- 07.Nov.2021
WinSetupFromUSB 1.9- 13.May.2019
WinSetupFromUSB 1.8- 16.May.2017
WinSetupFromUSB 1.7- 09.Aug.2016
WinSetupFromUSB 1.6- 28.Nov.2015
WinSetupFromUSB 1.6 beta2- 03.Aug.2015
WinSetupFromUSB 1.6 beta1- 24.May.2015
WinSetupFromUSB 1.5 - 10.May.2015
WinSetupFromUSB 1.4 - 27.March.2014
WinSetupFromUSB 1.3 - 10.Jan.2014
WinSetupFromUSB 1.2 - 20.Dec.2013
WinSetupFromUSB 1.1 - 08.Dec.2013
WinSetupFromUSB 1.0 - 17.Oct.2013 (libwim-9.dll updated- 14.Nov.2013)
Previous versions

1,339 thoughts on “Downloads

  1. could you put a checkbox with “format the disk”, it does not mean the same as ‘autoformat with FBinst”
    i don’t know if your soft allow the usb installation without formating the key
    i can’t push the “GO” button, i don’t want to format the key, i want to prevent the display “formating the key…” with or without FBinst

    • Autoformat option is not mandatory. But you need to ensure disk is properly partitioned with MBR and active partition first.
      If autoformat is not selected, disk will not be formatted, just grub4dos will be installed, but there is a check if the disk has MBR and active partition before proceeding. If these are not satisfied, it won’t continue.

      Does that make sense?

  2. New version but how to update so that new options and fixes were available on the previously created USB?

      • OK I understand and thank you for the info. Of the programs I tested, this works very well, but it is cumbersome to add new and update old iso images. Are there plans for an interface to indicate and automatically detect the type and add iso images and an interface to update iso images, i.e. replace the old iso with the new one?

        • Updating already added Windows 7/10/11 sources is matter of replacing the corresponding ISO file, if it’s minor version update. It’s hard to automate given the wide range of supported sources like PE builds, Recovery/Antivirus etc images.
          Automatic detection of source type has been planned for quite some time, but that would require major rewrite of the GUI and most of the code, something I really don’t have now time for.

  3. Thanks! Love the app, but you should look into Let’s Encrypt for some SSL on this site. 😉 Especially since you have a form asking for emails, names or logins. SSL also makes it harder for someone to spoof the download link.

  4. Такая вот проблема, помогите, пожалуйста…
    USB аккумулирует 32 ГБ в WinSetupFromUSB Ставлю пункт Автоматическое форматирование с помощью FBinst, в формате FAT32 и добавляю образы по очереди, все как обычно. Но установка с версией Win10 2004 19041.264 и все возможные сборки новые значения до 21H2 X64 не планируются на доступ к UEFI и MBR выдают ошибку Не удалось смонтировать виртуальный диск. Невозможно продолжить, нажмите OK для перезагрузки.
    Образы X86 загружаются без проблем на любые устройства с UEFI и MBR

    • Have you tried starting fresh with new download of the program, in a new folder ( that’s to avoid conficts with any previous versions) and using stock Microsoft sources only?

      • Пробовал, тогда ошибки нету, но меня такой вариант не устраивает, мне нужно что бы в одном ISO образе были все редакции WIN10. HOME PRO LTSC и так далее.
        Пробовал записывать ISO образы Win10_x64bit по очереди по одному, но в каждом из мною перечисленных ниже (4) ISO образов упакованы все редакции WIN10.
        1) 20H2 (19042.685) выдает ошибку
        2) 21H1 (19043.1110) выдает ошибку
        3) 21H2 (19044.1466) выдает ошибку
        4) 2004 (19041.508) ВСЕ OK ошибок нет, но этот ISO образ и более старый и занимает менее 4ГБ, а мною выше перечисленные (3) разных ISO образа занимают более 4ГБ и выдают одну и ту же ошибку после записи и только ISO Win10_x64bit в FAT32. В NTFS работают все (4) разных образа ISO как по очереди так и вместе. Но мне вариант в NTFS не подходит.
        Заметил одну особенность что ISO образы размером более 4ГБ именно в формате записи FAT32 выдают эту же ошибку, а ISO образы которые я перечислил выше (1) (2) (3) имеют размер меньше 4ГБ
        В следствии чего WinSetupFromUSB 1.10. видит что в FAT32 уместить ISO образ боле 4ГБ невозможно. По этому программа автоматически пережимает ISO образ в Архив winRAR, а так же разбивает этот ISO образ на 2 части + WIM. И того получается:
        В папки WINSETUP есть папка W10_x64 и в этой папке есть еще папка sources>boot.wim, выходим назад в корень папки W10_x64 и в ней видим w_10_21Н2_x64_13.01.2022.iso.001(3,99 ГБ) and w_10_21Н2_x64_13.01.2022.iso.002(366 МБ) при чем что (( w_10_21Н2_x64_13.01.2022.iso.001(3,99 ГБ) это и есть тот самый winRAR)) а ((w_10_21Н2_x64_13.01.2022.iso.002 этот файл вообще неизвестного формата))
        Мне очень сложно объяснять из-за неточности перевода. Я могу записать видео и дать вам ссылку, что бы вы посмотрели можно так сделать?

        • A bit confused because of translation.
          Are you saying program is putting all these sources in win10_x64, instead of their own folder, which leads to messed up ISO files? If that’s bthe case, you can try using the advanced option for custom Windows folder and boot manu names and force them in separate folders, could be a bug introduced recently.

          Splitting is not using winrar or anything, file is just cut in parts before the 4 GB boundary, that’s all, there is no a single byte added to the original file and this should not be a problem.

          You can upload somewhere the program log files for me to review, FAQ #14:
          http://www.winsetupfromusb.com/faq/

            • Is the H in ISO file name in Cyrillic?
              w_10_21Н2_x64_str_13.01.2022.iso

              Replace all Cyrillic charachers with latin ones in these ISO files, and all the sources in a path with latin characters only, then try again.

              From the log:

              [LaunchApps]
              %systemdrive%\windows\WinPreSetup.exe, “/mountiso=WINSETUP\W10_x64_2004\w_10_21═2_x64_str_13.01.2022.iso.001”

              Note the odd character after _10_21, that’s why this particular source is failing to start, likely the other ISOs have same issue, got no time to check all logs and away from computer.
              Leave ISO splitting alone, it has nothing to do with the issue.

              • Спасибо вам огромное за помощь, проблема была в названии ISO образа ,буква “H” была виновна в ошибке.
                Я очень долго ломал бы себе голову если бы вы мне не ответили, но вы все же ответили мне, и проблема решена!
                Программирование это не мое, я очень плохо разбираюсь в чтении лог файлов, спасибо вам за помощь

Leave a Reply to John Costner Wenceslas Wenceslas RANDRIANAIVOSON Cancel reply