Here you can get help, access FAQ and tutorials, get support, report a bug of make feature request about WinSetupFromUSB by leaving a comment.
Here you can get help, access FAQ and tutorials, get support, report a bug of make feature request about WinSetupFromUSB by leaving a comment.
can I use my usb to upload other things afer I do a boot usb with this tool? will the boot brake if i use my usb for other things to upload i mean pdf, images etc?
Yep, can use it as usual
I’m trying to use a USB created with WinSetupFromUSB to install CentOS 5 and Fedora Core 14, and even though I put the full ISOs on my USB drive, the installer prompts me to provide a media for the packages. It doesn’t seem to be aware of itself being a package source. Is that normal? Is there a known way to circumvent this? Thank you.
booting from partition 0
cannot continue if plop is active,please start this entry without loading plop.
press any key to returne to the main menu.
This a message from a plop ehen i try to boot minitool. and hiernes
Did you start from USB using PLOP?
http://www.winsetupfromusb.com/files/download-info/winsetupfromusb-1-8-exe/
Start version v1.7.
Fix pls.
how to add windows 10pe or windows 7pe to multiboot?
Same way as Win7 or Win10
Test2
Is there any way that you could add support for a USB HDD or SSD so we can make a master boot HDD that is more reliable than a USB Flash Drive? I would assume that this would just need a change in the program to recognize the drive attached by USB.
USB hard disks are supported since the very first version. Actually, most of tests while working on the program, are on USB disk.
If it’s not shown for you, try the advanced option “show disks on all interfaces”, but VERY careful which disk you select, internal disks will also be displayed.
Hi there,
Firstly, thanks for a great program. I’ve been using it on and off for the past week, and only just now run into an error. When formatting the USB on an 8GB USB drive and selecting FAT16 (for MS-DOS), I get the error “FAT16 supports up to 4GiB partitions, try resetting to FAT32”. Why is this?
Umm… Isn’t the message clear enough?
No. I haven’t specified that I need a 4GiB or higher partition, so why is it forcing me to use FAT32 when I’d rather use FAT16?
There is no option to select partition size when using auto-format, full drive capacity is used, which is 8 GB in your case and FAT16 can’t be used.
So I can’t use an 8GB or higher USB and have FAT16 with WinSetup?
Only can’t use the auto-format option.
There are BootIce and RMPrepUSB included, can use either. Don’t recall if the also included FBinstTool supports custom partition size. Loads of external tools also exists. So there are plenty of options.
Why insist on FAT16?
I’ll try and use them, then.
I’m creating a DOS 6.22 boot disk in order to run legacy programs contained in the root of the USB. Booting into DOS 6.22 works well enough on FAT32 but I don’t get access to any of the files on the root, and I was told FAT16 might make a difference.
either or all of sources boot.wim bootmgr\boot\, \boot\BCd are missing,or source is not supported error
Need to see the log. Most likely ISO is broken or heavily customised. Can 7-zip open it?
how to boot window XP .
win 7 & 10 are working but win xp ix not bootable
Como puedo desinstalar sistemas que fueron agregados al pendrive con el programa WinSetupFromUSB_1-8_x64, sin llegar a formatear el usb???
Hello
How to boot xp by wonderful . Kindly send me screenshot in my gmail account.
Freddy,
Please read “15. How to remove already added sources?” at the following url: http://www.winsetupfromusb.com/faq/
Por favor lea ’15. ¿Cómo quitar fuentes ya añadidas?’ en url siguiente: http: // http://www.winsetupfromusb.com/faq/
Por favor lea ’15. ¿Cómo quitar fuentes ya añadidas?’ en url siguiente: http: // http://www.winsetupfromusb.com/faq/