Here you can get help, access FAQ and tutorials, get support, report a bug of make feature request about WinSetupFromUSB by leaving a comment.
Here you can get help, access FAQ and tutorials, get support, report a bug of make feature request about WinSetupFromUSB by leaving a comment.
Hello, have a qeustion to this great tool. Normally if you boot directly from windows dvd you can see “repair options” at left bottom. if you boot windows setum from usb, the repair options wont show.
how to fix that?
thanks!
Which Windows version?
Don’t you get dialog box at start asking you whether to run repair?
Can also use the Q-dir option and launch whatever you need prior to starting setup.
Windows 7, 8 and 10. Sometimes the dialog box appear (only 8 and 10) but this is long time ago. Never see this again. Have made a Multiboot Stick to install and repair Windows at every time on every pc, so i need the repair options. I know i can add the repair disk isos from every windows version, but this is not working when pc only has usb 3.0. have think it must be a nice solution there, then wat is the reasion that the normal repair options not appear?
mean this
https://www.img-load.de/images/2017/01/28/capture2017012811013945128dd9.png
its german because im german user 🙂
Need to test a bit on my side. As mentioned, workaround is always to include Q-dir, as from it you can always launch whatever you need before Setup. No need at all to add separate repair ISOs.
Dont understand how q-dir can help here, i need to start repair options that are not can be start manually. otherwise i can use schift+f10 to start cmd during setup and can start what i want except the repair options.
dont understand how q-dir can help here, it cant start the repair options. if it possible it can also be done with cmd, cmd can be start with shif+f10.
Repair option just launches an executable file, I don’t recall the name, need to check in the source code and computer is not around. You should be easily find in with a bit of googling.
i have thinked to that it just must be an .exe file, but i cant find the right one. googlin for a while and nothing found yet. maybe ist an optional switch behind a .exe.
File is x:\sources\recovery\recenv.exe, where X: is Setup system drive, the mounted one from boot.wim, not a volume on the internal or USB disk. On unmodified source it’s always X:
I see in source code that custom prompt whether repair to be launched is for older Windows versions, like Vista etc. It’s been a while since I played with that, but remembering on newer versions repair option was present on the stock Setup start screen, Maybe Microsoft have changed something since my last tests, will take a look when spare time allows.
Nice this works, thank you :-). Maybe you can repair it, so it works the usual way.
Hey, short Update. I recreate USB-Stick with other Windows Isos and the Repair Options is now shown with Windows 7 and 8. Only in win10 is missin. Using Build 10.0.14393.
Getting NT6 Error…. Log file entry below:
2017/01/30 15:54:13- Updating BCD store in E:\boot\bcd
2017/01/30 15:54:13- Path to bcdedit.exe: C:\Windows\system32
2017/01/30 15:54:13- Checking for multiple osdevice entries
2017/01/30 15:54:13- The boot configuration data store could not be opened.
A required privilege is not held by the client.
2017/01/30 15:54:13- Updating default description to: Windows 10 – x86 in E:\boot\bcd
2017/01/30 15:54:13- The boot configuration data store could not be opened.
A required privilege is not held by the client.
A required privilege is not held by the client
This comes from bcdedit. Is some other program messing around?
Where is WinSetupFromUSB located? Move it to a simple path, c:\winsetup for example.
尊敬的老师 ：
我使用winsetupfromusb 1.7 制作 win7 32 \win7 64 制作多系统U盘引导，不知道怎么操作的，将win7 32 / 64 win 8集成到一个优盘上。但本次制作相当困惑，先后做过多次制作，出现了不少问题在制作，一直没有制作成功。如果不将语言转换为英文，无论是先做64位还是32位，都提示“could not prepare Nt 6 boot files !”.如果改变语言设置，能够正常制作，32位能够正常安装 ，但64位虽然能够引导电脑，但是在执行到 win7 安装界面时无法显示欢迎界面，经过一段时间的等待，提示无法关联到虚拟磁盘，点击确定后提示winsetup.dll文件损坏，立即闪退重启。如果先做64位，32位出现同样情况。另外，初始化优盘是用fat32 还是ntfs，还有就是，在导入第一个镜像的时候，是否点选“auto format it with fbinst”。给一个完整的、 正确的操作指引。
谢谢
Hi! Why do not the built-in programs “Windows 10 PE Gandalf’s” load?
HOW CAN I EDIT WINDOWS BOOT MANAGER
WINDOWS 7
WINDOWS 8.1
WINDOWWS 10
I WANA EDIT THESE NAMES …. HOW?
Go to FAQ page, click on FAQ #16.
i put my issue on a comment but no one help me. can you help me ? i have problem when i install an iso file linux when defragment (no speac on disk) how make defrag manual ?? and thank you
I have replied on 30 Jan, on the downloads page.
Thanks buddy 🙂
Love your tool, if only I could get it to work! I just made a stick with Win7, Win8.1 and Win10 on it. I can boot fine to it, and I get the menu where I can select which setup I want to run. After that I get “Loading files…”, which completes on each OS setup, then it freezes at some point early in the next phase. At that point, in Win7 it says “Starting Windows” and freezes even as the color logo is taking shape. In Win8.1 I get the teal logo image, then it goes to black and stays there. In Win10 I have the teal logo with spinning white dots below, then it goes to black and eventually the activity on the stick stops. I used FAT32 – should I have used NTFS?
FAT/NTFS wouldn’t matter.
Try USB 2.0 port.
Try disconnecting any additional hardware.
Try on another machine.
The issue you are having I doubt has anything to do with the program. Does the same source work with the MS tool?
Please help me
How to fix hal.dll is missing error with windows xp
Need to provide more details what has been done and wjat your setup is
You will get the message “HAL.DLL corrupt or missing” with Windoze XP if the boot.ini file is corrupt.
Boot from Windoze XP installation CD, chose ‘recovery console’ (or press F10 when it asks for F6 at they very beginning).
Enter: BOOTCFG /REBUILD