Here you can get help, access FAQ and tutorials, get support, report a bug of make feature request about WinSetupFromUSB by leaving a comment.
Here you can get help, access FAQ and tutorials, get support, report a bug of make feature request about WinSetupFromUSB by leaving a comment.
How would I add the boot only FreeBSD ISO? (`FreeBSD-12.0-RELEASE-amd64-bootonly.iso) ?, selecting the ‘Linux ISO/Other Grub4dos comptabile ISO’ results in a boot that fails with ‘BTX halted’ error.
The most of the BSD distros are not compatible
The FAQ says we can load an MS-DOS 7.1 ISO specifying “Linux ISO/Other Grub4dos compatible ISO”. Would this include the Windows 98 Startup CD (which runs under MS-DOS)?
Don’t think I have tested, but you can definitely try
Well, it works, but it’s useless. After booting, W98’s MS-DOS 7.1 thinks the USB drive is the primary (C:) drive, so “FDISK /MBR” writes to the USB drive, not HDD0. 🙁
hi
help me..
.
WinSetupFromUSB is great utility for creating a “multiboot” usb stick, great for technicians who want to only carry around less USB sticks while still having all the different installation media available. On my 64GB USB3.0 stick, I’ve got Windows 7, 10, DBAN (secure erase), Clonezilla (disk cloning), Hiren’s BootCD (troubleshooting) and a variety of linux distros.
Recently, when adding any versions of Windows Setup ISO image file to WinSetupFromUSB the following error occurred –
Error!
This doesn’t seem to be valid source!
Either or all of \sources\boot.wim, \bootmgr
\boot\, \boot\BCD are missing, or source is not supported.
RETRY to select another source or CANCEL to return to the main menu
Retry | Cancel
Can you provide the logs? Details in FAQ #14
I have been using this utility for a few years. I have a couple 2 TB Western Digital USB drives that I had previously set up with no problem. I just purchased some new Seagate 2 TB drives that WinSetupFromUSB will not recognize.
“No USB Disks detected or not properly formatted”
The Seagate drives came formatted as GPT, but I converted them to MBR because that’s what the program is looking for according to FAQ #5. I’ve also attempted to clone one of my working multi-boot USB drives that were configured using WinSetupFromUSB. The new drives will still not boot and still get the same message that No USB disks are detected from this program.
I tried using FBInstTool, Bootice, and RMPrepUSB, but I don’t know what changes to make in those utilities that would make the USB drive readable in WinSetupFromUSB.
Have you tried the advanced option “show disks on all interfaces”?
If still no luck- please post the log file.
The advanced option still isn’t showing the Seagate drive. According to the log, the Seagate drive is being recognized as SCSI instead of USB devices. Is there anything that can be done to make these drives work with this utility?
Link to the log: https://www.datafilehost.com/d/e4f33ff7
Disk is seen as SCSI because of the controller it uses, that’s Windows driver+disk controller thing, nothing to do with the program.
Try reformatting it with RMPrepUSB, selecting bootloader option as BOOTMGR, FAT32 and checkmark on Boot as HDD.
Thank you. I first got several error messages from RMPrepUSB. After using the “Clean” option, it formatted successfully. Now choosing to display disk drives on all interfaces shows my Seagate drive as an option.
i’ve installed windows 10 with wintousb on a toshiba canvio external disk.. don´t know why, i chosed win pro and it had insatll home.. it was OK.. i run windows in the disk.. but i mede the process again to install pro edition, them it dont´t boot anymore.. winload.exe problem.. i tried the solution bootrec with no sucess.. i tried again to reinstall, and again.. but this disk runs this OS in another pc.. what could this be.. i think BIOS has the same config as before
edit: i choosed MBR for bios and uefi.. if i choose mbr for bios i get an error of disk can´t boot pres control+alt+delete
solved.. well, i put it to work.. made with wintousb in a VM Win10.. don’t know why, it’s fine now.. at first, i was made in wintousb in win 7..
i cannot run the exe file which your site allows me to download. I tried both 1.8 and 1.9 and both try to autoextract then fail to extract…
Do file checksums match?
Please, help me, I am running winsetupfromusb 1.9 x64 but when I click on the rmprepusb button it does nothing, no window appears as well as when I click on the other two buttons.
in the log file it appears as if the window had opened but it is not like that
What happens if you run these manually from program’s folder?
winsetupfromusb 1.8 add done windows xp sp3, hiren boot and windows 7 and 10 but issue some system not showing xp setup and hiren boot ….What should be done it
Boot in BIOS/compatible mode
winsetupfromusb 1.8 add done windows xp sp3, hiren boot and windows 7 and 10 but issue some system not showing xp setup and hiren boot showing direct windows 7 and 10…. What should be done it
https://www.dropbox.com/s/4muhamw8s9359g7/waiting%20usb%20disks%20to%20initialize.zip?dl=0
Having the same problem on WinSetupFromUsb version 1.9 and 1.8 too, tried several times now. The above log is from 1.8, if you want 1.9 log, I’ll give you.
Windows 10 v1903 64-bit installation gets added and boots fine.
Windows 10 v1903 32-bit installation gets added fine, but when booting, it shows “waiting usb disks to initialize” message, then error “Please reinsert the USB disk”.
This error means that WinPreSetup.exe can’t find the ISO file. I’ve mounted boot.wim and checked winpeshl.ini, it has the right path to ISO. I’ve mounted boot.wim from 64-bit and checked winpeshl.ini, and the entry is similar, and there, it works, on the same PC.
Must be some differences in 32-bit and 64-bit procedure?
This error means that the USB disk is not available, surely its contents too. Setup helper keeps trying to find the USB disk, but eventually times out. Unless there is a bug in the helper, that means Windows have not yet mounted the disk for some reason. Setup helpers for 32 and 64 bits are 100% identical, just same code is compiled in 2 binaries, 32 and 64 bits.
Usually down to USB 3.0 or other drivers required, or something along the lines. Possible workarounds- try another USB port, preferably 2.0 if there are such, try USB 2.0 USB disk/stick, check BIOS settings if there are any funny options about USB.
I’ve used Rufus to write the same 32-bit ISO to USB directly, and guess what? It does boot and show the setup interface, but the mouse or keyboard don’t work. So my guess is, in the Windows 10 32-bit setup, driver support is broken, so keyboard, mouse, storage don’t work, that’s why WinPreSetup.exe can’t mount the ISO. Very weird though, why the 64-bit installation works fine?
That’s hard to know, might figure out by trial and error method, disconnecting peripherals, changing BIOS settings if any and/or adding USB drivers to the source.