Here you can download WinSetupFromUSB and updates of the tools included.
Please do not hotlink files, use this page if you want to post a link to the program. If you need to link to a specific version, you could use version number like this:
http://www.winsetupfromusb.com/downloads/#1-10
Note: A few antivirus programs keep detecting a couple of the included files as viruses. This is false positive. These vendors were informed numerous times and the serious companies such as DrWeb and Kaspersky, update their signatures to remove the false detection within a few hours after being informed. Others, such as McAfee, despite all the efforts and contacts, don’t do anything to update their signatures. For a few unknown ones, which use third party signatures, there is no way to contact them or they simply don’t respond. This program will never knowingly distribute any kind of malware.
WinSetupFromUSB 1.10.exe (28 MB ; 982487 downloads)
- Windows 11 support
- added detection of higher Windows 10 build numbers for the boot menu names
- Removed file spit infobox if ISO file needs to be split
- Increased warning for large disks selection to > 64 GB
- minor bug fixes
WinSetupFromUSB 1.9.exe (28 MB ; 2682961 downloads)
- added support for multi-version/dual Windows ISOs (32 and 64 bits in one ISO for example). Stock Microsoft dual ISOs are supported and tested, other such sources too, as long as they use unmodified bootmgr and default location for BCD store is in /boot/bcd. Tested in BIOS/UEFI with both Secure Boot on and off, stock Windows 10 dual and single ISO builds 1803, 1809, Server 2016 and 2019.
- added detection of Windows 10 build number which is added to the boot menu names
- updated ImDisk and WimLib
- minor bug fixes
WinSetupFromUSB 1.8.exe (24 MB ; 2756955 downloads)
- fixed issue with Windows 10 and recovery option not shown
- fixed issue with persistence file size not set correctly and tooltip for using persistence
- updated some the tools to their latest version- BootIce, ImDisk, WimLib
Notes:
1) Windows 10 – single ISOs created by Microsoft Media Creation Tool or downloaded from Microsoft should work. Dual ISOs made by the same tool (x32 and x64 in a single ISO) are NOT supported yet due to the changed structure. Such source can still be added using the previous versions which dump entire contents as they are, 1.0 beta8 for example. Limitations- such source needs to be added first, and any other sources of the same type,but not the same x32+x64, has to be added using 1.6 beta 2 or later.
WinSetupFromUSB 1.7.exe (24 MB ; 1536803 downloads)
- disabled superfloppy check due to issues with latest Windows 10 builds
- increased input timeouts to 45 seconds
- fixed issue with Swedish locale and bcdedit
- added check if imdisk is an old version
Notes:
1) Windows 10 – single ISOs created by Microsoft Media Creation Tool or downloaded from Microsoft should work. Dual ISOs made by the same tool (x32 and x64 in a single ISO) are NOT supported yet due to the changed structure. Such source can still be added using the previous versions which dump entire contents as they are, 1.0 beta8 for example. Limitations- such source needs to be added first, and any other sources of the same type,but not the same x32+x64, has to be added using 1.6 beta 2 or later.
WinSetupFromUSB 1.6.exe (24 MB ; 1175720 downloads)
- updated imdisk package for compatibility with latest Windows 10 versions
- Added Windows 10 in all GUI elements
Notes:
1) Windows 10 – single ISOs created by Microsoft Media Creation Tool or downloaded from Microsoft should work. Dual ISOs made by the same tool (x32 and x64 in a single ISO) are NOT supported yet due to the changed structure. Such source can still be added using the previous versions which dump entire contents as they are, 1.0 beta8 for example. Limitations- such source needs to be added first, and any other sources of the same type,but not the same x32+x64, has to be added using 1.6 beta 2 or later.
2) If program is run on latest Windows 10 builds, seconds source can no longer be added due to incorrectly detected superfloppy format of the USB disk. This is due to changed by Microsoft WMI call results or structure. Fix is being worked on and will be released as soon as it’s ready.
WinSetupFromUSB 1.6-beta2.exe (24 MB ; 406930 downloads)
- Fixed missing EFI boot menu for Windows 10 sources
Note: Windows 10 – single ISOs created by Microsoft Media Creation Tool or downloaded from Microsoft should work. Dual ISOs made by the same tool (x32 and x64 in a single ISO) are NOT supported yet due to the changed structure. Such source can still be added using the previous versions which dump entire contents as they are, 1.0 beta8 for example. Limitations- such source needs to be added first, and any other sources of the same type,but not the same x32+x64, has to be added using 1.6 beta 2 or later.
WinSetupFromUSB 1.6-beta1.exe (24 MB ; 225005 downloads)
WinSetupFromUSB 1.6-beta1.7z (23 MB ; 64480 downloads)
- Added support for Windows Vista/7/8 and above sources larger than 4 GB and FAT32 for EFI compatibility- credits. In other words, now is possible to use FAT32 formatted USB drive and add larger than 4 GB source, say Windows 10, to be able to boot in EFI mode. As this is new feature not yet fully tested, the first version is released as a beta. Any feedback is appreciated.
WinSetupFromUSB 1.5.exe (23 MB ; 344392 downloads)
WinSetupFromUSB 1.5.7z (23 MB ; 73458 downloads)
- added Windows 10 support
- small bug fixes
WinSetupFromUSB 1.4.exe (22 MB ; 1966950 downloads)
WinSetupFromUSB 1.4.7z (22 MB ; 559982 downloads)
- added better handling of illegal characters for Linux/Other ISO source file name
- added advanced option for adding persistence partition for Linux sources. Each source has its own persistence space associated with it
- added better handling for Kon-Boot, source is to be added as ISO file using the Linux/Other ISO option
- added advanced option to add custom folder with boot critical drivers for NT6 sources (Vista and later). These drivers are added in boot.wim and loaded with DrvLoad before start of Setup, scratch space is increased accordingly. Only drivers for present devices will be loaded. Use it to add USB, SATA/SCSI or Chipset/USB drivers for example. Loaded drivers will be staged and available to the OS being installed. For non boot-critical drivers (Lan, WLan, Video etc.), have a look here
- added internal check for NT6 sources with multiple boot.wim, only default osloader entry in BCD store and the corresponding boot.wim will be added
- fixed errors when USB disk was initially prepared with the auto-format option, and on next run of the program it may complain about missing MBR and partition table
WinSetupFromUSB 1.3.exe (22 MB ; 1609980 downloads)
WinSetupFromUSB 1.3.7z (22 MB ; 314236 downloads)
- Fixed bug when adding NT6 source with missing new line feeds in WinPEshl.ini
- Fixed handling of NT6 sources with install.esd
- Fixed bug with NT6 sources with EFI directory but no BCD file in it
- Added Ei.cfg and CVersion.ini Removal Utilities in \tools\winisoutils directory should one needs those files removed from the NT6 source ISO file
- WimLib updated to version 1.6.0 for compatibility with new WIM formats
WinSetupFromUSB 1.2.exe (22 MB ; 303302 downloads)
WinSetupFromUSB 1.2.7z (22 MB ; 77587 downloads)
- Fixed bug where program running on Windows localized in other than English language would not add NT6 source
- Improved handling when program is placed and run from directories which contain special characters- `~@#$%^&()-+=,; Single quote – ‘ is not supported in program directory path and there is a check for that
- Added an advanced option for NT6 (Vista and later) sources to add Q-Dir File Explorer, which starts before Setup. This is useful to quickly browse disk contents and backup and restore files before launching Setup, rather than booting first in another OS to perform the same task. When Q-Dir is closed, Setup starts.
- BootIce updated to version 1.3.2.1
WinSetupFromUSB 1.1.exe (22 MB ; 220630 downloads)
WinSetupFromUSB 1.1.7z (22 MB ; 44544 downloads)
- (U)EFI support for Windows Vista x64 SP1 and later 64 bits Windows. USB disk must be formatted in FAT32 as per EFI specifications to boot under EFI. To prepare USB disk running the program under Windows XP or 2003, which do not include bcdedit.exe, an active internet connection must be present in order to download it
- default auto-format file system has been changed to FAT32 for EFI compatibility
- Firadisk driver is now added to each XP 32 bits source, but disabled by default. A new option in DPMS and custom F6 floppy menus activates it. This should help loading SATA/AHCI/RAID drivers from virtual floppy on problematic machines
- NT6 sources boot menus are now handled by BOOTMGR
- fixed recognition of Windows 8.1 sources which contain INSTALL.ESD instead of INSTALL.WIM
- added check in boot menu for Linux sources to warn if PLoP is loaded. Linux sources would not work with PLoP loaded as it supports only read mode
- removed the ZIP archive as it seems some users tend to launch the program directly from the Windows zip folder view, rather than extracting all files and folders. A self extracting SFX archive is added instead
- updated wimlib to 1.5.3 which would also fix the issues with the first 1.0 versions (downloaded before 14.Nov.2013) and NT6 sources
- various small bug fixes
WinSetupFromUSB 1.0.zip (37 MB ; 757087 downloads)
WinSetupFromUSB 1.0.7z (22 MB ; 74653 downloads)
Windows Vista and above Setup/PE may not start, command prompt may appear saying :
“A winpesh.ini file is present, but no commands were successfully launched. This could be caused by incorrect formatting or an invalid executable name.”
or simply restarts. Please refer to this post for details and fix, or re-download the program if you downloaded it before 14.Nov.2013.
- custom boot menu name when Linux/Other ISO is added
- when XP/2003/2000 source is added and incorrectly the i386 folder is pointed as source directory, program uses its parent directory
- other small fixes and improvements
WinSetupFromUSB 1.0RC4.zip (37 MB ; 53252 downloads)
WinSetupFromUSB 1.0RC4.7z (22 MB ; 43692 downloads)
- Ability to add multiple Windows Vista, 7, 8, Server 2008/2012 sources from ISO file. Use the same option to add PE2 (Vista/Server 2008) and above based utility. Thanks to synchronicity for his amazing wimlib project
- Ability to add almost any Linux based ISO which uses hybrid cd-rom/hard disk mode, credits to cdob . Refer to this page for a non exhaustive list of tested ISOs
- Auto-format option when used with NTFS would do its best when formatting the disk, to avoid fragmented large files on this volume later on by moving $MFT at the beginning of the partition. This way $MFT zone remains at the beginning of the volume and there should be way more contiguous space available large files to occupy
- DPMS updated to DPMS2, thanks to Steve
- the command prompt window during GUI mode of XP/2000/2003 setup is now hidden, thanks to cdob. It’s needed to keep the USB drive mounted throughout the GUI mode of setup
- added ability to copy all log files to the relevant WINSETUP sub-folder during PE phase of NT6 (Vista and later) boot. Create an empty file debugme with no extension in the relevant sub-directory, e.g \WINSETUP\Win7x64\debugme, and all log files from the start of PE phase will be copied next to it
- Updates of the tools included and various bug fixes
WinSetupFromUSB 1.0 beta8.zip (31 MB ; 74052 downloads)
WinSetupFromUSB 1.0 beta8.7z (18 MB ; 19464 downloads)
- added an option for Auto-format, using FBinst internally. This will delete all partitions and create a single one on the target USB disk, use with care
- added an option for Auto-detect and use SATA/RAID/SCSI F6 drivers during XP/2003/2000 Setup thanks to DPMS by Chenall. The boot entry is optional and has to be selected once before booting First part of Setup
- added an option to include a floppy image with F6 SATA/RAID/SCSI drivers during XP/2003/2000 Setup. The boot entry is optional and has to be selected once before booting First part of Setup
- working USB to USB install thanks to WaitBT driver by Shao Miller
- added an option for creating a “kicker” ISO for Vista/7/8/Server 2008 Setup, thus avoiding possible setup failures
- added another debug option for Vista/7/8/Server 2008 Setup, shifting hard disk possitions, thus avoiding possible other setup failures
- added an option for custom folder name and boot menu entry for XP/2003/2000 Setup
- added an option for adding and using custom NTDETECT.COM in order to avoid possible BSOD 0x0000007B on some machines
- fixed partial GUI freezes during large file copy, e.g. install.wim
- fixed bug where changes occur in the small ISO for XP/2003/2000 Setup leading to errors at start of Text mode
- added USB monitor function to refresh list if USB disks when disk is connected or disconnected
- updated versions of the included programs and tools, QEMU should now support booting Vista/7/Server 2008 x64 versions too
- various bug fixes and improvements
WinSetupFromUSB 1.0 beta7.7z (7 MB ; 33229 downloads)
- fixed issues on some new systems when XP/2000/2003 Setup hangs during text mode:
http://www.msfn.org/…all-iso-method/ - fixed grub4dos menu.lst entries when detecting the number of hard drives connected
- fixed custom boot menu titles input box when adding multiple similar XP/2000/2003 sources
- grub4dos, included tools and programs updated
- fixed issue with incorrectly detecting if source is Windows 2000
- flushing USB disk write cache is now performed internally, rather than using external programs
WinSetupFromUSB 1.0 beta6.7z (4 MB ; 40791 downloads)
- fixed bug in the created menu.lst when adding PartedMagic/Ubuntu variants or other ISOs
WinSetupFromUSB 1.0 beta5.7z (4 MB ; 5741 downloads)
- added option to display all connected disks in case one needs to prepare eSATA etc. drives.
- improved detection of USB disks at start of GUI mode in case of 2000/XP/2003 setup
- added support for adding Ubuntu/Kubuntu/Xubuntu ISOs
- added option for shared BTS OEM folder if several sources need to share same OEM folder. Use tooltip for info.
- experimental option to prepare source to be installed on USB, to be tested further.
- better handling in case 2000/XP/2003 install is on machine with 2 or more internal disks
- at start of GUI mode, after own setup.exe and setup.cmd are finished, setup.exe from th e source is executed, no matter another fake or the original one. Thus BTS presetup.cmd for example is executed by its fake setup.exe.
- added option not to check for and install grub4dos MBR. One would have to take care of chainloading grldr by other means.
- updated many of the included programs
WinSetupFromUSB 1.0 beta4.7z (4 MB ; 11666 downloads)
- fixed issue with non-English versions of Windows XP/2003
- fixed bug when program directory is on the same USB disk and partition which is being prepared
- removed dependencies on Windows Scripting Host, in case it’s broken.
- BootIce, Grub4Dos, SysLinux, RMPrepUSB updated to the latest versions
WinSetupFromUSB 0.2.3.exe (4 MB ; 108802 downloads)
Hello, Thanks very much for the program and am not trying to complain by any means, but, I have an older version and just downloaded the latest available to use and get an error extracting the 7z file using 7zip. I looked at the checksum and it doesn’t match yours:
File: WinSetupFromUSB-1-1.7z
CRC-32: 8ebbbebe
MD4: cb725f65a1687b542ad427d1c76f697a
MD5: 161d270c2b986a57f9f0fa34d530eeac
SHA-1: ff9d9fc7c0224faf46a85d570aeb8fe251496aea
Same goes for the .exe. Any ideas? thanks.
I’ve just downloaded both 1.1 files and checksums match the posted ones.
Did you try downloading the files again? Are you using a download manager? What browser are you using?
I downloaded it again using the Firefox download Que this time and it worked, although the checksums still didn’t match, heh?. I was using a download manager – DownThemAll the first few times, which I know doesn’t always place nice. Thanks!
I am sorry…., the checksums DO match. I was looking at the wrong file. Thanks again!
Hello Sir…………
‘WinSetupFromUSB’ is not working for ‘Win7Ult-SP1-x86-en-US-Sep2013.iso’.
I try following ISO with both WinSetupFromUSB 1.1 and 1.2 , But it always restart. While Windows 8.1 is working good. ” Win7.SP1.IE9.lite.v4-IK ” is also working good.
—————————————————————————————————————————-
File Name-
Win7Ult-SP1-x86-en-US-Sep2013
Torrent LInk-
(LINK REMOVED)
—————————————————————————————————————————-
Please tell me why It restart each time. If any bug, then please fix as soon as possible.
Thanks for Beautiful Tool which support multiple Windows ISO.
I love ‘Easy2Boot v1.19’ , But ‘WinSetupFromUSB’ also attracting me.
I read following sentence in your site which really impress me. And that’s why I moved toward it.
——————————————————————————————
“Windows Vista, 7, 8, 8.1, any architecture, any SP, any version”
——————————————————————————————
But it is little wrong due to Windows 7 ISO Compatibility Issue.
So, Please fix it as soon as possible. So that I can love it more than ‘Easy2Boot’ .
@Krishna Dev Anand
Please put all log files found in \backups\ directory, along with WinSetupFromUSB.log which is next to the program exe files in a zip archive and upload it to http://www.datafilehost.com. Reply with the download link.
Please note that questionable torrent links are not allowed here, I have edited your comment.
Ok, found where the problem is. It is fixed and included in the next version.
Since it’s quite customized source and only few users might be affected, I’ll release the new version when there are more changes.
Please keep in mind, that program is developed and tested with stock, unmodified sources, hence the statement you are quoting, is perfectly valid and there is indeed Windows 7 compatibility.
You could probably understand, that testing every modified source is impossible.
I do my best to support every possible source, so simply report if you come across a non-working one.
Hello Sir,
First thanks for quick response and Sorry for torrent link.
Actually I know about ‘WinSetupFromUSB’ from a long time, But I don’t know about its Multi-Windows-ISO feature. I recently read a a post publishing in ‘intowindows.com’ regarding ‘WinSetupFromUSB 1.1’ @ 18.Dec.2013 . Then I learn about it and know its Awesome features. Above Windows 7 Issue disturb me whole day and night. Next Day ‘WinSetupFromUSB 1.2’ come and rock. I have to waste my whole day due to ‘non resumable links’. In our country Internet is very costly, and I can’t afford High Speed Internet.
I was sure that ‘WinSetupFromUSB 1.2’ will resolve this issue, But it only allow me to add Windows 8.1 into ‘NTFS’ formatted USB Drive.
All related log files found in \backups\ directory, along with ‘WinSetupFromUSB.log’ are attached in below link. I know that you already find out issue, But you can further check for any other problem.
http://www.datafilehost.com/d/4b643d87
Request- You can add compatiblity of following ISOs in ‘WinSetupFromUSB’…
1- Spotmau BootSuite 2012
2- Ultimate DLCD Boot 2014 v2.0 (Coming Soon)
——————————————————————————————————
I am currently using following configuration in my USB Drive……..
Partition 1 – 9.69 GB – Reserved for ‘Easy2Boot v1.19’
Partition 2 – 5 GB – For Both ‘Data Storage’ and ‘WinSetupFromUSB-1-2’
Normally ‘Partition 1’ is Hide and ‘Partition 2’ show in Windows. At
this time ‘Partition 2’ is used for ‘Data Storage’. and Booting is
done by ‘E2B Partition’ in both ‘Hide’ and ‘Unhide’ Cases.
Now I use ‘WinSetupFromUSB-1-2’ in ‘Partition 2′ without formatting
whole ’16 GB Transcend Jetflash 780 3.0 USB Drive’. Now Booting is
perfectly done by ‘Partition 2’ because at this time ‘E2B’ is Hide and
is in the 2nd position of ‘Partition Table’. Am I right ???
Now when I format ‘Partition 2’ ,then it is working just like ‘Data
Storage’ and Booting is done by ‘Partition 1’ as before…..
Now I can utilize ‘Partition 2’ for both ‘Data Storage’ and
‘Multi-Booting’ without harming ‘E2B Partition 1’.
Some times I have to repair ‘Windows 8.1’ which is not properly done
by ‘E2B’ due to FireDisk. It never repair Windows 8.1 properly. I have
to run ‘Windows 8.1 ISO’ without FireDisk in order to repair. It was
why I have to use ‘WinSetupFromUSB-1-2’…………….
Actually I love ‘Firedisk’ feature because it skip ‘Product Key’ Step.
And Provide Windows Installation without Product Key.
As I know there are only two tool in the world which can ‘Multiboot Multiple Windows ISOs’ in real sense which are……..
1- ‘Easy2Boot’ by Steve
2- WinSetupFromUSB (Please tell me your good name)
Please tell me about such an another tool if you know about that……
Thanks for Reading my Experience…..and Sorry for lengthy and Boring Post.
******************————‘•ღ♥ღ¸• Krishna •ღ♥ღ ¸ •¨————-******************
I’ve put for you an updated version only of the two program files which should resolve your problem, just replace the original exe files with the ones in this archive. Let me know how it goes.
About the requests- I’ll see what I can do. Please keep in mind that I don’t support warez or such with unresolved copyright issues as one of the software appears to be.
Hello Sir,
Thanks Thanks & Thanks
Now My USB is rocking with ‘WinSetupFromUSB’ along with ‘E2B’. Its work perfectly. I want to learn one thing from you. Actually I want to extract the content of the .exe files which you have give me. Which tool you use for extracting following files. If you don’t mind then please tell me about .exe extraction tools which you are using right now ?
Thanks in Advance
Please tell me how to extract .exe files which you have send me……………
Extract them from the 7z archive with 7-zip for example, the exe files do not need to be extracted, just place them next to the original files and run them.
Hello Sir,
I think you could not understand what I am saying…
I want to extract following .exe files.
WinSetupFromUSB_1-2.exe – 1,255 KB
WinSetupFromUSB_1-2_x64.exe – 1,404 KB
So. Please tell me how I can see content of there two files.
Thanks in Advance
I do understand you, but I think you are missing something.
Why would you want to extract the exe files, to make changes? It doesn’t work like that. They are compiled from a source code.
Halo again itaushanov, WinSetupFromUSB is my top USB booting Tool, I tried many tools [RMPrepUSB,sardu, Yumi,xboot,E2B,UNetbootin, Rufus, universal boot,……] but your tool is the best for me……….. I need a favor from you ; i just need you to add check for Insall.ESD in the version 1.0 without any other modifications because this version meets my needs and with this addition it will the be perfect version for me
I am afraid I won;t be able to revert back to that version easily.
🙁 Bad News, any way thank you I can handle almost my needs with using Version 1.0 along with version 1 Beta 8
Hello Sir.
You are right Bro. I also think that ‘Easy2Boot’ and ‘WinSetupFromUSB’ are the best Multiboot USB Tools in the world. Do you know about any other tool which can also provide Multibooting of ‘Windows XP + Windows 7 + Windows 8 + Windows 8.1 + Ultimate Boot CD + Ubuntu 13.10 + GParted + Spotmau Bootsuite 2012 etc….’ from a single USB Drive. If you know, then Please tell me about that….
Can you tell me why ‘WinSetupFromUSB 1-0’ is more useful for you than ‘WinSetupFromUSB 1-2’. While 1.2 is latest one. Please tell me about features which made 1.0 more better than 1.2 for you.
Thanks in Advance
I Love This Software. It Helped Me Lot In Installing Windows. I Have Not Seen A Better And Advance USB Software To Install OS In My Whole Life. Love The Person Who Made It Possible. Keep UP The Good Work. 🙂
The same here
New Version?
Holidays? 🙂
There are some problems with the .iso of windows 7 when this .iso is boots after the windows 7 screen appears PC Reboots In WinSetupFromUSB 1.2 and Even in WinSetupFromUSB 1.1 Please Find some Solution for this thing.
But any ways its a great job u all guys have done Suporb Excellent
Thank You …………….
@Bhavik
I have faced same problem with ‘Windows 7 iso’ . Please check above comment in order to solve your problems. Please download above attached file. you can also download bugfix via following link
http://www.winsetupfromusb.com/download/winsetup-1-2-updated-exe-7z/
Enjoy………
http://www.casimages.com/img.php?i=140108044840551340.png
;{
You have to download the full 1.2 version and replace the two exe files with the ones in the comment above.
the version WinSetupFromUSB_0-2-3 works great on all computer
but the WinSetupFromUSB 1.2 dosn’t work with hp 7900 disk sff
Program prepares USB disk transferring sources onto it.
Which one of the sources did not work with latest version, but worked with 0.2.3?
What exactly “do no work” mean, would you be more informative- what source, what version, how far it gets when booting, is there any error message etc. etc.?
After i updated the the version
http://www.winsetupfromusb.com/download/winsetup-1-2-updated-exe-7z/
every thing is just complete and works great
thank you for you support and help
This it the complete tool for usb installation on the whole web up till now
Thanks and always be for us to give us such support
Thanks for the kind words and glad it’s useful.
A new version including those updates will be out soon.