Tutorials

 

  1. (EN) How to add multiple Windows XP / 2000 / 2003 sources and Kaspersky Rescue CD
  2. (EN) How to add multiple Windows NT6/10 (Vista, 7, 8, 10, Server 2008/2012) sources and Ubuntu Desktop with persistence
  3. (EN) How to figure out what type the source is and which option to use
  4. (EN) How to start Debian and its derivatives from USB hard disk
  5. (RU) WinSetupFromUSB инструкция по использованию
  6. (RU) Мультизагрузочная флешка с помощью WinSetupFromUSB
  7. (ES) Cómo instalar Windows XP, 7, 8/8.1 desde el mismo PenDrive
  8. (ES) WinSetupFromUSB Guide – Maravento
  9. (HU) Multiboot USB eszköz készítése
  10. (PL) Instalacja Windows XP z pendrive
  11. (VN) Hướng Tạo USB Chứa Nhiều Bộ Cài Đặt Windows

248 thoughts on “Tutorials”

  2. Any way to integrate a MAC OS iso or dmg file for install? with Linux and Windows ISO files too.
    I use a 250GB SSD wiht some System install ISO files, all works but MAC OS ISO don´t work can not be mounted….
    Perhabs with Grub for DOS?

    Reply

  3. Hi, do you possibly know what this guy did (adding grub.cfg file? changing menu.lst?) to allow UEFI only start?

    ”
    loganj01 says:
    August 31, 2015 at 10:43
    in the end i manage to do what i wanted
    half with your program
    half manual/google ???? – to add entries in grub.cfg
    it isn’t that hard….well i had to look for a few hours how to configure grub to point to another folder. i gave up and choose iso way ????

    your program – for windows menu to choose w8/w10
    grub to
    – add entry for install windows (after will show windows like menu)
    – add entry for mint 17
    so far everything works….
    i have yet to install linux…but since it started in live session i doubt i’ll have problems.
    “

    Reply

  4. hola.
    como una recomendacion seria que se pudiera cambiar desde el menu (en un lateral) el idioma
    y que los mensajes de error o advertencia salieran en el idioma correspondiente

    gracias, es un gran programa

    Hi.
    As a serious recommendation that you could change from the menu (on one side) the language
    And that the error or warning messages were sent in the corresponding language

    Thanks it’s a great program

    jorge (spain)

    Reply

  7. Os programas do Hiren’s boot cd 15.2 não aparece.
    Estou usando pendrive multboot com o Winsetupfromusb 1.8 é 1.6 vou tentar com o 1.4.

    Desde já agradeço!

    Reply

  8. Where can I find and edit menus. I added Windows XP, Windows 7, Windows 8.0 and Windows 10. All entries for windows come once except Windows 8.0. I added Windows 8.0 only once. But the menu show 2 entries. Please guide.

    Reply

  9. Great Tool Thank you!!!
    at first i was gettin an error message ” update boot.wim could not run and to shut down anything using it. I treid a couple times with sane result. So i reinstalled Winsetup from usb and instead of foramtting with fbinst THen adding the ISO i formatted without the /iso. Then went back and added the first iso. It went off smoothly. I ONLY mention this error message in case its info is of any value to anyone.
    Can this tool be used to format or repair a usb HDD with bad sectors? it does way more than just let you boot win fromusb. Id also like to know how to donate

    Reply

    • The error is most likely some other program interfering with the temp folder of WSFU temporarily locking it- antivirus, online drive sync etc. Try using c:\winsetupfromusb\ if haven’t done so yet.

      What you did to overcome this, most likely only changed timing when the folder is locked but gave program enough time to do its job.

      For repairing bad sectors, you need to use drive manufacturer software, whatever that is. No any other software can offer this, no matter what it claims. Chkdsk for example would only try to access every sector, thus forcing disk firmware to replace them bad ones when hit with spare sectors. Nothing really is done by chkdsk, all internal work is done by the drive firmware.

      In my experience this has only temporary results. Once bad sectors start developing, sooner or later there will be more and more.

      Reply

      • Thank you for a speedy reply. I did untinstall an AV prior to rerunning WSFU. I forgot about that. So it worked well burning the usb. Unfortunately I am not good with computers but I wish I knew how to use all the features of WSFU. It seems to do a lot!! Thank you for the info on the bad drive. All I did was unplug it without ejecting and it seemed to destroy it. Until that moment the drive was fine. But there may have been some underlying reason. I haven’t found any tools for a toshiba pocket drive so far. Thank you

        Reply

Leave a Reply