Here you can get help, access FAQ and tutorials, get support, report a bug of make feature request about WinSetupFromUSB by leaving a comment.
Here you can get help, access FAQ and tutorials, get support, report a bug of make feature request about WinSetupFromUSB by leaving a comment.
尊敬的老师 ：
我使用winsetupfromusb 1.7 制作 win7 32 \win7 64 制作多系统U盘引导，不知道怎么操作的，将win7 32 / 64 win 8集成到一个优盘上。但本次制作相当困惑，先后做过多次制作，出现了不少问题在制作，一直没有制作成功。如果不将语言转换为英文，无论是先做64位还是32位，都提示“could not prepare Nt 6 boot files !”.如果改变语言设置，能够正常制作，32位能够正常安装 ，但64位虽然能够引导电脑，但是在执行到 win7 安装界面时无法显示欢迎界面，经过一段时间的等待，提示无法关联到虚拟磁盘，点击确定后提示winsetup.dll文件损坏，立即闪退重启。如果先做64位，32位出现同样情况。另外，初始化优盘是用fat32 还是ntfs，还有就是，在导入第一个镜像的时候，是否点选“auto format it with fbinst”。给一个完整的、 正确的操作指引。
谢谢
Hi! Why do not the built-in programs “Windows 10 PE Gandalf’s” load?
HOW CAN I EDIT WINDOWS BOOT MANAGER
WINDOWS 7
WINDOWS 8.1
WINDOWWS 10
I WANA EDIT THESE NAMES …. HOW?
Go to FAQ page, click on FAQ #16.
i put my issue on a comment but no one help me. can you help me ? i have problem when i install an iso file linux when defragment (no speac on disk) how make defrag manual ?? and thank you
I have replied on 30 Jan, on the downloads page.
Thanks buddy 🙂
Love your tool, if only I could get it to work! I just made a stick with Win7, Win8.1 and Win10 on it. I can boot fine to it, and I get the menu where I can select which setup I want to run. After that I get “Loading files…”, which completes on each OS setup, then it freezes at some point early in the next phase. At that point, in Win7 it says “Starting Windows” and freezes even as the color logo is taking shape. In Win8.1 I get the teal logo image, then it goes to black and stays there. In Win10 I have the teal logo with spinning white dots below, then it goes to black and eventually the activity on the stick stops. I used FAT32 – should I have used NTFS?
FAT/NTFS wouldn’t matter.
Try USB 2.0 port.
Try disconnecting any additional hardware.
Try on another machine.
The issue you are having I doubt has anything to do with the program. Does the same source work with the MS tool?
You will get the message “HAL.DLL corrupt or missing” with Windoze XP if the boot.ini file is corrupt.
Boot from Windoze XP installation CD, chose ‘recovery console’ (or press F10 when it asks for F6 at they very beginning).
Enter: BOOTCFG /REBUILD
i keep getting this error while booting windows 10 32 or 64 bit
0XC000042
and it tells me that windows/system32/boot/winload.exe does not exist or somthing else
how can i solve this problem?
Assuming that winload.exe DOES exist, windoze is unable to find it because it can’t access the boot device. Ergo, your BIOS does not support the boot device, or you need to revise a BIOS setting.
my flash drive got both windows 10 and 8.1
there is no problem with 8.1 only win 10 has this problem neigher if i put only win 10 on the flash drive
i tested it on 4 pc’s and 2 laptops all got the same problem
As I mentioned earlier, from the FAQ “http://www.winsetupfromusb.com/supported-sources/”:
Windows 10 – single ISOs created by Microsoft Media Creation Tool or downloaded from Microsoft should work. Dual ISOs made by the same tool (x32 and x64 in a single ISO) are NOT supported yet due to the changed structure. Such source can still be added using the previous versions which dump entire contents as they are, 1.0 beta8 for example. Limitations- such source needs to be added first, and any other sources of the same type,but not the same x32+x64, has to be added using 1.6 beta 2 or later.
ماذا يعني ‘ناير’؟
Perhaps your Windoze 10 ISO is defective?
You said above, “i keep getting this error while booting windows 10 32 or 64 bit”. Are you booting windoze or the windoze installation iso? If the former, you can’t run Windoze from a USB stick. It’s not Linux. If the latter case, I seem to recall that WINSETUPFROMUSB does not work with combination (32-bit and 64-bit) ISOs. Download a 32-bit OR 64-bit ISO and add it to your USB stick. If you need both, add separate ISOs.
I am having 8 GB USB drive and win7 and 8 was copied successfully.
When I am trying to copy win 10 it gives error file too large to be placed in FAT32, It will be split in parts and when I press OK nothing happens and nothing is copied
Need to see the log files to be able to help, details in the FAQ.
And the first message is not an error, FAT32 does not support files larger than 4 GB and program INFORMS you that it will be split in part as a workaround.
You must make light version. : windows 10, path to iso, run; windows 7, path to iso, run. People long time ago forgot DOS, MBR…